English
27
7 Put the cutter back into the guard.
8 Place the shaving heads in the shaving head
holder.
Note: Make sure that the projections of the
shaving heads t exactly into the recesses of
the shaving head holder.
9 Place the retaining rings back onto the
shaving head holder and turn them clockwise
('click').
- Each retaining ring has two recesses and two
projections that t exactly in the projections
and recesses of the shaving head holder.
- Turn the ring clockwise until you hear a click
and the ring is xed.
1
2
To Next Page
Loading...
