English
30
6 Place the new shaving heads in the shaving
head holder.
Note: Make sure that the projections of the
shaving heads t exactly into the recesses of
the shaving head holder.
7 Place the retaining rings back onto the
shaving heads and turn them clockwise to
reattach the retaining ring.Each retaining ring
has two recesses and two projections that t
exactly in the projections and recesses of the
shaving head holder.
- Turn the ring clockwise until your hear a click
to indicate that the ring is xed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads
and reattach the retaining rings. Do not
place the shaving head holder on a surface,
as this may cause damage to the shaving
heads.
8 Reinsert the hinge of the shaving head holder
into the slot of the shaving unit. Close the
shaving head holder (‘click’).
1
2
To Next Page
Loading...
