16
English
1
Make sure that the appliance is switched off and
disconnected from the wall socket.
2
Press the release button on the shaving unit and pull
the shaving head holder off the shaving unit.
3
Rinse the hair chamber and shaving head holder
under the tap.
4
Remove the shaving heads. For detailed instructions,
see 'How do I replace the shaving heads?'.
Note: Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
5
Clean the cutter and guard under the tap.
6
Shake off excess water.
7
Put the shaving heads back into the shaving unit. For
detailed instructions, see 'How do I replace the
shaving heads?'.
8
Insert the hinge of the shaving head holder into the
slot in the top of the shaving unit and close the
shaving unit.
Cleaning the pop-up trimmer
Clean the trimmer after each use to prevent clogging and
damage.
Never dry the trimmer teeth with a towel or tissue, as
this may damage the trimmer teeth.
To Next Page
Loading...
