Philips S7000 series - Page 25

1 Switch off the appliance.
2 Pull the shaving head holder off the bottom
part of the shaving unit.
3 Rinse the hair chamber and shaving head
holder under the tap.
4 Turn the retaining ring anticlockwise and lift it
off the shaving head.
1
2
Repeat this process for the other retaining rings.
Place them aside in a safe place.
5 Remove the shaving heads from the shaving
head holder. Each shaving head consists of a
cutter and guard.
6 Clean the cutter and guard under the tap.
25
English