Philips S7000 series - Page 40

Problem
Possible cause Solution
You have used
another cleaning
fluid than the
original Philips
cleaning cartridge.
Only use the original
Philips cleaning cartridge.
The drain of the
cleaning cartridge is
blocked.
Remove the cartridge from
the SmartClean system and
push the hairs down the
drain with a toothpick.
The shaver is not
fully charged
after I charge it
in the
SmartClean
system.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection
between the
SmartClean system
and the shaver.
Press down the top cap
(‘click’) to ensure a proper
connection between the
shaver and the SmartClean
system.
40
English