5 Place new shaving heads in the holder.
Note: Make sure the notches on both sides of the
shaving heads t exactly onto the projections in the
shaving-head holder.
6 Place the retaining rings back onto the shaving
heads and turn them clockwise.
- The retaining ring has two recesses that t exactly
in the projections of the shaving head holder.
Turn the ring clockwise until you hear ‘click’ and
the ring is xed.
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach the
retaining rings. Do not place the shaving head holder
on a surface when you do this, as this may cause
damage.
1
2
1
ENGLISH 29
To Next Page
Loading...
