Philips S7882 - Detailed Shaving Head Cleaning; Cleaning Cutters and Guards; Reassembling Shaving Heads; Cleaning the Pop-Up Trimmer

19
English
it may take several weeks before optimal shaving
performance is restored.
5
Clean the cutter and guard under the tap.
6
Shake off excess water.
7
Put the shaving heads back into the shaving unit. For
detailed instructions, see 'How do I replace the
shaving heads?'.
8
Insert the hinge of the shaving head holder into the
slot in the top of the shaving unit and close the
shaving unit.
Cleaning the pop-up trimmer
Clean the trimmer after each use to prevent clogging and
damage.
Never dry the trimmer teeth with a towel or tissue, as
this may damage the trimmer teeth.
1
Make sure that the appliance is switched off and
disconnected from the wall socket.
2
Push the trimmer release slide down to open the pop-
up trimmer.
3
Switch on the appliance and rinse the pop-up trimmer
with warm water.
4
After cleaning, switch off the appliance.
5
Carefully shake off excess water and let the pop-up
trimmer air dry.
6
Close the trimmer.