Installation & User’s Manual PL1 LED Luminaires
8 INSTALLATION AND SET UP
WARNING! Before attempting any installation or service, disconnect all power at power source. Turning off the
luminaire does not disconnect power. Installation and service should only be performed by a trained and qualified
professional. Be sure to check circuit capacity before installing luminaires.
PL1 LED Luminaire - Track Mounted Models
PL1 LED Luminaire - Ceiling Mounted Models
WARNING! All PL1 LED Luminaires must be mounted - vertically - as shown above to allow proper cooling.
Luminaire head may be positioned as desired.
PL1 LED
Luminaire with
Lightolier Track
Mount
PL1 LED
Luminaire with
LSI Track Mount
PL1 LED Luminaire with
Universal (EUTRAC) Three
Circuit Track Mount Adapter
North American International
PL1 LED Luminaire with
Canopy Mount
PL1 LED Luminaire
with Ceiling Rose Mount
Detail of power connection
block in ceiling-mounted
models. For wire codes, see
"Connecting Power" on
page 6.
North American
International
To Next Page
Loading...
