Philips Selecon PL1 Series - DMX 3-Channel (3-Chan) Mode

Installation & User’s Manual PL1 LED Luminaires
22 DMX CONTROL
3. DMX 3-Channel (3-Chan) Mode
Table 2-2 provides DMX channel mapping of all DMX512 control values when the PL1 LED Luminaire is in 3-
Channel (3-Chan) DMX512 mode (as set by the luminaire’s menu system).
Table 2-2: PL1 LED Luminaire DMX Channel Mapping (3-Chan Mode)
DMX
Channel
Parameter Range DMX Range%
Default -
recommended
console default
values
Description
1 Intensity 0 - 255 0 - 100% 0 8-bit control for Intensity of LED settings.
2
Preset Color Selection
Notes:
• Color Presets 5
through 25 are cali-
brated factory col-
ors and can be
reloaded if needed
through the fixture’s
menu system.
• These colors have
been matched to
precise X and Y
coordinates at the
center of the beam
at wide angle, we
have given you the
ability to adjust
these colors as
your personal per-
ception may vary.
0 - 255 0 - 100% 0
Used to access presets stored in fixture
firmware, such as CCT presets, defined gel
presets, and more.
No Preset Activated = DMX 0 - 3
Color Preset 0 (Off) = DMX 4 - 7
Color Preset 1 (Scratch Pad) = DMX 8 - 11
Color Preset 2 (Warm White) = DMX 12 - 15
Color Preset 3 (Cool White) = DMX 16 - 19
Color Preset 4 (Daylight) = DMX 20 - 23
Color Preset 5 (Arc White) = DMX 24 - 27
Color Preset 6 (Red) = DMX 28 - 31
Color Preset 7 (Yellow) = DMX 32 - 35
Color Preset 8 (Daylight Blue) = DMX 36 - 39
Color Preset 9 (Magenta) = DMX 40 - 43
Color Preset 10 (Kelly Green) = DMX 44 - 47
Color Preset 11 (Medium Amber) = DMX 48 - 51
Color Preset 12 (Lavender) = DMX 52 - 55
Color Preset 13 (Blue) = DMX 56 - 59
Color Preset 14 (Light Pink) = DMX 60 - 63
Color Preset 15 (Green) = DMX 64 - 67
Color Preset 16 (Pink) = DMX 68 - 71
Color Preset 17 (Amber White) = DMX 72 - 75
Color Preset 18 (Dark Fuchsia) = DMX 76 - 79
Color Preset 19 (Light Amber) = DMX 80 - 83
Color Preset 20 (Steel Blue) = DMX 84 - 87
Color Preset 21 (Lt. Green/Blue) = DMX 88 - 91
Color Preset 22 (Orange) = DMX 92 - 95
Color Preset 23 (Medium Pink) = DMX 96 - 99
Color Preset 24 (Cyan) = DMX 100 - 103
Color Preset 25 (Purple) = DMX 104 - 107
Color Preset 26 (Custom) = DMX 108 - 111
Color Preset 27 (Custom) = DMX 112 -115
Color Preset 28 (Custom) = DMX 116 - 119
Color Preset 29 (Custom) = DMX 120 - 123
Color Preset 30 (Custom) = DMX 124 - 127
Color Preset 31 (Custom) = DMX 128 - 131
3 Timing 0 - 255 0 - 100% 255
Allows for timing control of both the intensity and
color parameters. Channel should default to 255
for smoothest actions using console and/or
manual fades. Refer to "PL1 Luminaire DMX
Timing Channel Detail" on page 23 for more
information.