HD7857/20 / HD7857/21
5-24
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
Remove all loose parts like Driptray, water container and
pod-holders.
Remove the back cover.
• Remove the four Torx screws (A) (T15) from the back
cover.
• Carefully unhook the back cover from behind the both
side covers.
• Use a flathead screwdriver to undo both snap hooks on
either side of the back cover
• The back cover can now be tilted forward.
• Two hoses are still connected to the water container
socket, they can be removed for easy access.
Remove the front cover.
• Place the appliance on its backside, to be able to reach
the underside.
• Use a flathead screwdriver to undo both snap hooks.
1
2
Remove the side covers.
• To be able to remove the side covers the top cover
surrounding the lid needs to be removed, to do this two
snap hooks need to be undone, they can be reached via
the opening of the back cover.
• Unlatching the hooks needs some force, once undone
you need to open the brewchamber to be able to
completely remove the top cover.
• Unscrew both screws (B) on top side of the appliance,
they were previously covered by the top cover.
• Place the appliance on its backside, now you can undo
the snap hooks (two on either side) , then you can
remove the side panels.
With all covers removed you are able to reach all main
components:
- Pump
- Boiler
- Steam pump
- 3-way valve
- Thermo block fuses
- Brew head
To Next Page
Loading...
