Philips SensoTouch 3D RQ1250/16 - Cleaning and Maintenance; General Cleaning Advice; Shaving Unit Cleaning

7 Insert the lug of the shaving unit into the slot in the top of the shaver
(1). Then press down the shaving unit (2) to attach it to the shaver
(‘click’).
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the shaver, its accessories and the Jet
Clean System (specic types only).
- The best and most hygienic way to clean the shaver is in the Jet Clean
System(specictypesonly).Youcanalsorinsetheshaverunderthetap
orcleanitwiththecleaningbrushsupplied.
- Becarefulwithhotwater.Alwayscheckifthewaterisnottoohot,to
preventyourhandsfromgettingburnt.
- Cleantheshaveraftereveryshaveforoptimalshavingperformance.
- Youcancleantheoutsideoftheshaverwithadampcloth.
- Regularcleaningguaranteesbettershavingperformance.

Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
1 Rinse the shaving unit under a hot tap for some time.
2 Pull open the three shaving heads one by one.
ENGLISH12