3 Rinse the shaving head holder under
a warm tap for 30 seconds.
4 Carefully shake off excess water and let
the shaving head holder dry.
5 Close the shaving head holder (‘click’).
Thorough cleaning method
Make sure the appliance is switched off.
1 Press the release button and open the
shaving unit.
2 Pull the shaving head holder off the bottom
part of the shaving unit.
3 Turn the retaining rings anticlockwise and
remove them.
4 Remove the shaving heads from the shaving
head holder. Each shaving head consists of
a cutter and guard.
Note: Do not clean more than one cutter and guard at a
time, since they are all matching sets. If you accidentally
put a cutter in the wrong shaving guard, it may take several
weeks before optimal shaving performance is restored.
1
2
ENGLISH24
To Next Page
Loading...
