17
English
Note: You can stop the water flow during use by sliding the pause switch
on the handle to the 'off' position (motor will pause).
Cleaning orthodontic brackets with the Quad Stream nozzle
a To clean around orthodontic brackets, place the nozzle tip over
each bracket.
b Gently rotate the nozzle tip around the bracket in a small circle
before moving to the bracket on the next tooth.
After each use
1
When you are finished, turn off the product.
2
Pick up and empty the reservoir.
3
Remove the nozzle from the handle by pushing the eject button on the
back of the handle.
4
Rinse the nozzle under the tap.
5
Insert the nozzle back into the handle.
To Next Page
Loading...
