1 Guidance tip
2 AirFloss nozzle
3 Activation button
4 Reservoir and cover
5 Handle
6 Charge indicator
7 Power on/off button
9 Charger
Note: The contents of the box may vary based on the model purchased.
Charging
1 Put the plug of the charger in the wall socket (Fig. 2).
2 Place the handle on the charger (Fig. 3).
,
is charging (Fig. 4).
Note: When it is fully charged, the AirFloss has an operating time of up to
2 weeks (or 14 uses).
to be recharged (fewer than 3 uses left).
Preparing for use
1
Align the nozzle so the tip faces the front of the handle and press
the nozzle down onto the handle (‘click’) (Fig. 5).
Note: Replace the nozzle every 6 months for optimal results. Also replace
the nozzle if it becomes loose or no longer clicks onto the handle.
2 Open the cover of the reservoir (‘click’) (Fig. 6).
ENGLISH 9
To Next Page
Loading...
