Philips Sonicare Elite+ - Easy-start Feature

Easy-start
The Easy-start feature gently increases power over the rst 14 brushings
to help you get used to brushing with the Philips Sonicare toothbrush.
This Philips Sonicare toothbrush comes with the Easy-start feature activated.
Activating or deactivating the Easy-start feature:
Place the handle in the plugged-in charger.
- To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 1 beep
and the battery level indicator lights up yellow to indicate that the
Easy-start feature has been deactivated.
- To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 2 beeps
and the battery level indicator lights up green to indicate that the
Easy-start feature has been activated.
Note: Each of the rst 14 brushings must last at least 1 minute to move
through the Easy-start ramp-up cycle properly.
Note: Use of the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces the effectiveness of the Philips Sonicare
toothbrush in removing plaque.
Quadpacer
- The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth evenly and
thoroughly. This Philips Sonicare toothbrush comes with the Quadpacer
feature activated (Fig. 7).
Charger conrmation
The handle beeps and vibrates briey when it is placed on the charger
base. This Philips Sonicare toothbrush comes with the charger
conrmation feature activated.
ENGLISH 11