Philips Sonicare Elite+ - Preparing for Use; Attaching the Brush Head; Charging the Appliance

General description (Fig. 1)
1 Hygienic travel cap
2 Brush head
3 Handle
4 Power on/off button
5 Battery level indicator
6 Charger
Note: The content of the box may vary based on the model purchased.
Preparing for use
Attaching the brush head
1 Align the brush head so the bristles face the front of the handle (Fig. 2).
2 Firmly press the brush head down onto the metal shaft until it stops.
Note: Philips Sonicare toothbrush brush heads are imprinted with icons to
easily identify your brush head (Fig. 3).
Charging the appliance
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger (Fig. 4).
, The light of the battery level indicator ashes and the appliance
beeps twice. This indicates that the toothbrush is charging.
Note: It can take up to 24 hours to fully charge the battery, but you can use
the Philips Sonicare toothbrush before it is fully charged.
ENGLISH8