Charging your Sonicare
1 Plug the charger into a live electrical outlet.
2 Place the handle on the charger.
- The battery level indicator ashes to indicate that
the toothbrush is charging.
Note: It can take up to 48 hours to fully charge the battery,
but the Sonicare may be used before it is fully charged.
Using your Sonicare
Brushing instructions
1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle towards the gumline.
3 Press the power on/off & mode button to turn
on the Sonicare.
4 Apply light pressure to maximize Sonicare’s
effectiveness and let the Sonicare toothbrush
do the brushing for you. Do not scrub.
5 Gently move the brush head slowly across the
teeth in a small back and forth motion so the
longer bristles reach between the teeth. Continue
this motion throughout the brushing cycle.
ENGLISH 7
To Next Page
Loading...
