Note: It is normal to see a slight gap between the brush head
and the handle.
2 Wet the bristles and apply toothpaste.
3 Place the toothbrush bristles against the teeth at a slight
angle (45 degrees), pressing firmly to make the bristles reach
the gumline or slightly beneath the gumline.
Note: Keep the center of the brush in contact with the teeth
at all times.
4 Press the power on/off button to turn on the Philips
Sonicare.
5 Apply light pressure to maximize Philips Sonicare’s
effectiveness and let the Philips Sonicare toothbrush do the
brushing for you. Gently move the brush head slowly across
the teeth in a small back and forth motion so the longer
bristles reach between your teeth. Continue this motion
throughout the brushing cycle.
10
English
To Next Page
Loading...
