Philips Sonicare Power Flosser 3000 - Modes; Intensity Settings

25
English
Modes
Your Power Flosser is equipped with two modes:
Clean
This mode, with pacer, provides standard water pressure for a great
clean.
Deep clean
This mode, with Pulse Wave technology, provides strong and gentle
pulses of water for a thorough clean.
Note: For details on "Pulse Wave technology" and "pacer" (see
'Features').
Selecting modes
1 Turn on the device by pressing the on/o button.
2 Press the mode button to select desired mode.
Intensity Settings
Your power osser comes with 10 dierent intensity settings. To
manually change the intensity, turn on the base and turn the intensity
dial to the setting you prefer.
Note: For rst time use, start the device from the lowest setting. It
is recommended to increase the intensity you use over the course
of a few weeks. This can give better cleaning benets as you are
able to tolerate higher settings.
25
HX3711_20_A6_cc2020_EN.inddHX3711_22_A6_cc2020_EN.indd
25 2020/06/15 13:44:062020/06/15 13:44:06