Philips Sonicare Power Flosser 3000 - Getting Started

27
English
Getting started
1 Connect the small plug into the bottom of the base and connect
the power plug in any 100-240V power outlet.
2 Remove the reservoir from the base.
Note: Make sure the product is powered o before you remove the
reservoir.
3 Open the lid, ll the reservoir with lukewarm water to the MAX ll
line.
4 Close the lid. Place the reservoir back on the base.
Note: Press down rmly to ensure there is no gap between the
reservoir and the base.
5 Insert your preferred nozzle into the handle. Press the nozzle
down until you hear a "click".
27
HX3711_20_A6_cc2020_EN.inddHX3711_22_A6_cc2020_EN.indd
27 2020/06/15 13:44:072020/06/15 13:44:07