32
Cleaning orthodontic brackets with the Quad Stream nozzle
a To clean around orthodontic brackets, place the nozzle tip over
each bracket.
b Gently rotate the nozzle tip around the bracket in a small circle
before moving to the bracket on the next tooth.
After each use
1 When you are nished, turn o the product.
2 Pick up and empty the reservoir.
3 Remove the nozzle from the handle by pushing the eject button
on the back of the handle.
4 Rinse the nozzle under the tap.
5 Insert the nozzle back into the handle.
6 Dry any excess water o the tether and handle.
32
HX3711_20_A6_cc2020_EN.inddHX3711_22_A6_cc2020_EN.indd
32 2020/06/15 13:44:082020/06/15 13:44:08