Philips Sonicare - Page 14

ENGLISH14
Features
Pressure Sensor
This Sonicare comes with the Pressure Sensor
feature activated. The Pressure Sensor works in all
3 modes and at all 3 intensity levels.
To deactivate or reactivate the Pressure Sensor
feature:
1 Place the handle with a brush head attached on
the plugged-in charger or sanitiser.
2 Press and hold the power button and the
mode button for 2 seconds.
, You hear 1 beep to indicate that the Pressure
Sensor has been deactivated.
, You hear 2 beeps to indicate that the Pressure
Sensor has been activated.
Quadpacer
- The Quadpacer is an interval timer that has a
short beep and pause to remind you to brush
the 4 sections of your mouth. Depending on the
brushing mode you have selected, the Quadpacer
beeps at different intervals during the brushing
cycle. The Quadpacer works in all 3 modes and at
all 3 intensity levels.
The Quadpacer feature on this Sonicare has
been activated. To deactivate or reactivate the
Quadpacer feature:
1 Place the handle with a brush head attached on
the plugged-in charger or sanitiser.
1


