– 503 – NWA-008845-001 Rev.5.0
32ch1008.fm
DESCRIPTION DATA
Assign the priority for Call Forwarding-All
Calls of Mobility Access call.
NOTE: Set the 2nd data to “0” to Mobility
Access station number for Call
Forwarding-All Calls of Mobility
Access call.
•
(1)
(2)
Y=484
00-15 : Service Restriction Class C as-
signed by CM12 Y=07
0 : See the table below.
3 : See the table below.
Assign the access code for Call Forwarding-
All Calls, Set and Cancel, respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (*5, #5)
A010: Call Forwarding-All Calls Set
A011: Call Forwarding-All Calls Cancel
Assign Call Forwarding-All Calls keys to the
D
term
s, as required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0010: Call Forwarding-All Calls Set/
Cancel
A
CM15
PRIORITY 2ND DATA=0
2ND DATA=3
HIGH
LOW
Restriction of Inter-tenant Connection Restriction of Inter-tenant Connection
Call Forwarding-All Calls/Split Call Forwarding-
All Calls
Call Forwarding-All Calls of Mobility Access
Call Forwarding-All Calls of Mobility Access Alternative ISDN Connection when Remote PIM
in survival mode (CID Call Routing per each sta-
tion)
Alternative ISDN Connection when Remote PIM
in survival mode (CID Call Routing per each sta-
tion)
Alternative ISDN Connection when Remote PIM
in survival mode (CID Call Routing per each ten-
ant)
Alternative ISDN Connection when Remote PIM
in survival mode (CID Call Routing per each ten-
ant)
Call Forwarding-Logout (D
term
IP)
Call Forwarding-Logout (D
term
IP) Call Forwarding-All Calls/Split Call Forwarding-
All Calls
UCD (Uniform Call Distribution) UCD (Uniform Call Distribution)
Do Not Disturb Do Not Disturb
Station Hunting Station Hunting
Call Forwarding-Busy Line/Split Call Forward-
ing-Busy Line
Call Forwarding-Busy Line/Split Call Forward-
ing-Busy Line
CM20
CM90
,
END
JULY/01/2006
MOBILITY ACCESS
To Next Page
Loading...