– 776 – NWA-008845-001 Rev.5.0
32ch2001.fm
DESCRIPTION DATA
Specify the condition for printing the Wake Up
call information if Hotel Printer is provided.
(1)
(2)
282:“RING ON OK” when call starts
283:“STATION BUSY” when station is
busy
284:“CONNECTION BLOCK” when call
is unsuccessful
286:“STATION ANSWER” when station
answers
287:“STATION NO ANSWER” when sta-
tion does not answer
0 : Not printed
1: To print
Specify whether Automatic Wake Up record is
printed out on Hotel Printer, and the report is
sent to PMS when setting or resetting Auto-
matic Wake Up.
(1)
(2)
267
0 : Available
1 : Not available
Assign the function keys for Automatic Wake
Up to the D
term
of guest room station or admin-
istrative station, if provided.
NOTE: This data assignment is not required
when Wake Up is set by PMS.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0024: Automatic Wake Up set/reset from
guest station
F0027: Automatic Wake Up set/reset from
administrative station with Single
Wake Up Time operation. NOTE
F0028: Automatic Wake Up set/reset from
administrative station with Multiple
Wake Up Time operation. NOTE
Assign the function keys for Automatic Wake
Up to the Front Desk Terminal.
NOTE: This data assignment is not required
when Wake Up is set by PMS.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1067: Automatic Wake Up NOTE
F1074: Set
F1075: Reset
F1077: Release
D
CM08
CM90
,
,
E
JUNE/01/2007
HOTEL SYSTEM PROGRAMMING
AUTOMATIC WAKE UP
To Next Page
Loading...