Philips T315XW01V5 - Page 21

Mechanical Instructions
EN 21LCD AUO 2k7 4.
4.9.2 Inverter Board(s)
Disassembly Master Inverter
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws, and remove the cover.
Figure 4-67 Remove Inverter cover screws
3. Unplug the lamp connector on the inverter. Be careful not
to pull and drag the wires. The use of a pair of pliers can be
helpful.
Figure 4-68 Remove Inverter connectors
4. Unplug connector on the Inverter board (see figure below),
and remove the inverter panel.
Figure 4-69 Remove connector
Reassembly Master Inverter
To reassemble, perform all processes in reverse order.
H_16901_018.ep
s
17100
7
H_16901_019.ep
s
17100
7
H_16901_020.ep
s
17100
7