Philips TCS125 - Page 81

Philips indoor luminaires3.80
X-tendolight TCS398 TL5
Suspended and surface-mounted luminaires
X-tendolight TCS398 luminaire, with
end caps (set of 2); for 1-lamp housing
195 mm versions (ZCS398 EP-S) and
for 2-lamp 311 mm versions (ZCS398
EP-T), needed with line-feature
luminaires (LF) only. Both available in
white (WH) and silver (SI)
Product ID EOC
ZCS398 EP-S WH (2PCS) 629193 00
ZCS398 EP-S SI (2PCS) 629209 00
ZCS398 EP-T WH (2PCS) 629216 00
ZCS398 EP-T SI (2PCS) 629223 00
X-tendolight TCS398 luminaire with
bracket to mount the luminaire on a
TTX400 light-line rail; for both for 195
mm and 311 mm luminaire versions
(ZCS398 MB-TTX400)
Product ID EOC
ZCS398 MB-TTX400 634548 99
Counterweights to paste inside the
luminaire (ZCS398 CW350). In most
cases not needed, depending on the
kind of gear and number of lamps used,
and only with 1-point suspensions
(ZPH501) and mounting on light-lines
Product ID EOC
ZCS398 CW350 631684 99
E14 lamp socket for emergency lighting
Product ID EOC
ZCS398 ELU-E14-2 614892 99
ZCS398 ELU-E14-4 614915 99
Indoor_2008_Chapter_03_LIS.indb 80 20-05-2008 14:50:19