Philips UV-C 9290024887 - Device Operation Guide; How to Operate the UV-C Box; Understanding Working Modes; Technical Specifications

Dry
Dry function removes moisture from objects
Gently press the “Dry” button, the timer indicator will display “30”
(30 min. dry duration by default). Both the timer indicator and the
working mode button will ash 3 times during this period, press the
“Dry” button again to choose either “30” or “50” as 30min. or 50min.
working duration. The ash will stop in 2 seconds, and the UV-C
appliance will start to work.
IMPORTANT: DO NOT USE THE DRY FUNCTION FOR ANY ELECTRONIC
PRODUCTS. DOING SO CAN RESULT IN DAMAGE.
After dry routine, mind your hands when you open the box due to
the high temperature. Allow the box to cool for several minutes prior
to removing the object(s) placed inside.
Disinfect+Dry
Disinfect+Dry function removes moisture and then disinfects objects
Gently press the “Disinfect+Dry” button, the timer indicator will dis-
play “40” (30 min. dry and 10 min. disinfection duration by default).
Both the timer indicator and the working mode button will ash 3
times, during this period, press the “Disinfect+Dry” button to choose
either “40” or “60” as 40min. or 60min. working duration(50min. dry
and 10min.disinfection). The ash will stop in 2 seconds, and the
appliance will start to work.
IMPORTANT: DO NOT USE THE DRY FUNCTION FOR ANY ELECTRON-
IC PRODUCTS. DOING SO CAN RESULT IN DAMAGE.
After disinfect+dry routine, mind your hands when you open the
box due to the high temperature. Allow the box to cool for several
minutes prior to removing the object(s) placed inside.
Product specication
Product description UV-C disinfection box
Product model 9290024887
Volt 220-240 Vac
Frequency 50/60 Hz
Wattage 135 W
UV-C appliance lifetime 6000 hours
Product Size 288.2 x 285.1 x 285.3 mm
Product Weight 2700 g
UV-C wavelength 253.7 nm
4
1. Power on: you will hear a beep, and the timer indicator will display “--”.
2. Press the button to open the top lid, load the objects evenly into the UV-C appliance and close the top lid. Keep the top lid closed through-
out the appliance’s operation.
3. Press working mode button to choose the appropriate working mode. See “Working mode guide” below.
4. Once the routine is completed, open the top lid, take objects out and unplug the UV-C appliance.
Disinfect
Disinfect function inactivates viruses and bacteria
Gently press the “Disinfect” button, the timer indicator will display
“10” (10 min. disinfection duration by default). Both the timer
indicator and the working mode button will ash 3 times, during
this period, press the “Disinfect” button again to choose either “15”
or “20” as 15min. or 20min. working duration. The ash will stop in 2
seconds, and the UV-C appliance will start to work.
Storage
Storage function continuously disinfects objects
Gently press the “Storage” button, the timer indicator will display
“20” (20 min. disinfection duration by default).
In this mode, the UV-C appliance will disinfect every 2 hours for 2
minutes after the 20 min. disinfection. The timer indicator is running
during the 2 hours periods and not during the 2 min. disinfection
duration and will stop at “--” when the 72 hours maintenance
routine is nished.
Operation guide
Working mode guide