57
V40 107P5
GENERAL PRODUCT SPECIFICATION
17" V40, 107P5 97KHz CMTR(HB)
TYPE : 107P50/00
BRAND : PHILIPS
8639 000 13853
2003-10-13
590
13
24
9
Go to cover page
Michael Wang
2003-10-13
4.7 Image non-linearity : pattern with 12 equal blocks along horizontal axis,
10 equal blocks along vertical axis. (see Fig. 1) (For preset & preload modes
only)
Fh > 48Khz : H non-linearity < = 5.5 %
Fh < 48Khz : H non-linearity < = 8.0 %
It is calculated by following formula :
Xmax Xmin
Horizontal non-linearity = X 100%
Xmax + Xmin
Where Xmax : the max block , Xmin : the min block
Note : Un-adjacent spec is same as adjacent spec.
Vertical non-linearity
< = 5.5 % at any preset & preload modes
It is calculated by following formula :
Ymax Ymin
Vertical non-linearity = X 100%
Ymax + Ymin
Where Ymax=themaxblock,Ymin:theminblock.
4.8 Mis-convergence
The maximum convergence error to be measured on a white spot or white
display
line to represents the maximum distance between the energy centers of any
two
primary colors. (See Fig- 6)
Mis-Convergence SPEC. Zone A / C is 0.3 / 0.4 When ? 45kHz.
4.9 Focus check (with 79.976KHz/75.025Hz, 1280 x 1024 mode)
Generate 9-blocks ME character pattern (Fig-7) to cover entire of the picture
area
90mm x 90mm (display size respect to Fig-1), adjust brightness control to
50% and
contrast at 100%, the ME character should be clearly identified in all display
area.
CRT Pitch 0.25mm
Zone A 0.25
Zone C 0.35
Center 0.15
http://jdwxzlw.5d6d.com/?fromuser=华盛维修
To Next Page
Loading...
