DESCRIPTION :
1
02.9663.0010 F 14-May-2009 9
Arc Ballast Unit
An external ballast unit is included with VL1000 arc models. In this case, the lamp
power input cable is already connectorized for use with this unit.
The following illustration shows the external arc ballast components.
Note: The Lamp Power Input Cable has conductors for lamp power and ballast
control. It is not compatible with VARI❋LITE Series 300™ lamp runs.
Dimmer Model
An on-board IGBT dimmer is
included with VL1000
incandescent dimmer models.
The dimmer heatsink is visible
on the power-side yoke leg as
shown in this illustration.
Lamp Connector
CPC-type connector for connecting
Lamp Power Input cable from luminaire.
Ballast Unit
Provides power for
arc lamp source.
Truss Hook Mount
Used to attach a truss hook.
Safety Cable Tab
Used to attach
safety cable clip.
Lamp Power Input Cable
Supplied cable and connector used
to connect luminaire to ballast unit.
40 inches (1m)
On-Board IGBT Dimmer
Internal lamp power dimmer,
configured for either 120V or 240V
operation depending on model.
To Next Page
Loading...
