EasyManua.ls Logo

Philips voice tracer DVT1200 - Radio (DVT2000); Radio Mode; Saving a Radio Station Pre-Set; Saving Radio Stations Automatically

Philips voice tracer DVT1200
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Radio (DVT2000)
Table of contents
8 Radio (DVT2000)
Note
• The headphones are the device's antenna. Radio reception is only
possible if headphones are connected to the device.
8.1 Radio mode
1
Connect the headphones to the device. (see also chapter 4.6.1
How to connect headphones, page 19).
2
In stop mode (start-up screen), press MENU.
3
Press h / b to select the radio menu Ö.
4
Press the record key, g, to confirm.
5
Press h / b to select the required frequency. Alternatively:
Press and hold h / b to start seeking for the next radio station.
6
Press the + / buttons to adjust the volume.
7
Press MENU to switch o the radio.
8.2 Saving a radio station pre-set
The radio can store up to 40 radio stations in pre-sets.
8.2.1 Saving radio stations automatically
1
In radio mode, press the record key g.
2
Press + / to select the Auto search function.
3
Press the record key, g, to confirm.
X The device automatically seeks and stores the radio
frequencies in the pre-sets. The device can store up to 40 radio
stations.
8.2.2 Saving a radio station manually
1
In radio mode, press h / b to select the required frequency.
Alternatively:
Press and hold h / b to start seeking for the next radio station.
2
Press the g key.
3
Press + / to select the Save channel function.
4
Press the record key, g, to confirm.
5
Press + / to select a station pre-set.
6
Press the g key to save the selected radio station in the pre-sets.

Table of Contents

Related product manuals