Philips WelcomeEye Connect 2 - ACCESSORIES; FAQ (Frequently Asked Questions)

F24
WelcomeEye Connect 2 / Touch / V4
WelcomeEye Outdoor: (Additional intercom panel)
ref.: 531006
- C-MOS colour sensor 900TVL
- Viewing angle H130° / V 90°
- Night vision (white LEDs)
- Strike plate control 12V/1.1A/1.5 s.
- Gate control: breaking capacity 12V/2A
- RFID (125kHz)
- IP44
- Operating temperature: -20°C/+50°C
- Dimensions: 168 (h) x 82 (w) x 38 (d)
WelcomeEye Cam: (additional camera)
ref.: 531007
- C-MOS colour sensor 900TVL
- Viewing angle: 95°H, 75°V
- Operating temperature: -20°C/+50°C
- Protection rating: IP66
10. ACCESSORIES
WelcomeEye AddCompact - DES 9300 DDE (ref.: 531005)*
WelcomeEye AddComfort - DES 9500 DDE (ref.: 531003)*
WelcomeEye Cam - DES 9900 CVC (ref.: 531007)
WelcomeEye Outdoor - DES 9900 VOS (ref.: 531006)**
WelcomeEye Lock - DES 1000 EDL (ref.: 531008)
WelcomeEye Lock - DES 1100 EDL (ref.: 531009)
WelcomeEye Power - DES 1000 DPS (ref.: 531010)**
WelcomeEye TAG - DES 1000 ACI (ref.: 531011)**
* Refer to the complete WelcomeEye Comfort/Compact instructions available on the
www.philips.com website for more information.
** Refer to the complete WelcomeEye Connect 2/Touch instructions available on the www.philips.com
website for more information.
11. FAQ
Failure Cause Solution
• The monitor will not
turn on
• The monitor is not
receiving power
• Verify that the power supply is
properly connected and turned on
• Check the polarity on the monitor
or at the power supply output
• Poor connection
or short circuit on
the line
• Resolve the connection problem