Philips WelcomeEye Connect 2 - Intercom and Accessory Specifications

EN23
WelcomeEye Connect 2 / Touch / V1
Intercom panel: (WelcomeEye Outdoor)
ref.: 531006
- C-MOS colour sensor 900TVL
- Viewing angle 130°H, 90°V
- Night vision (white LEDs)
- Strike plate control 12V/1.1A/1.5 s.
- Gate control: breaking capacity 12V/2A
- RFID (125kHz)
- IP44
- Operating temperature: -20°C / +50°C
- Dimensions: 168(h) x 82(l) x 38(d) mm
WelcomeEye Application (for WelcomeEye Connect and WelcomeEye Connect 2 only):
- Android v4.4 or above
- iOS 7 or above
- PUSH notication
WelcomeEye AddComfort: (additional monitor)
ref.: 531003
- 2 wires
- 7" screen
- Resolution: 800 x 480
- Current consumption: 460mA
- Power consumption: 11.1W
- 6 ringtones (85dB)
- Dimensions: 142(h) x 210(l) x 15(d) mm
WelcomeEye AddCompact: (additional monitor)
ref.: 531005
- 2 wires
- 4.3" screen
- Resolution: 480 x 272
- Current consumption: 400mA
- Power consumption: 9.6W
- 6 ringtones (85dB)
- Dimensions: 116 (h) x 146 (w) x 16 (d) mm
WelcomeEye Outdoor: (Additional intercom panel)
ref.: 531006
- C-MOS colour sensor 900TVL
- Viewing angle H130° / V 90°
- Night vision (white LEDs)
- Strike plate control 12V/1.1A/1.5 s.
- Gate control: breaking capacity 12V/2A
- RFID (125kHz)
- IP44
- Operating temperature: -20°C / +50°C
- Dimensions: 168 (h) x 82 (w) x 38 (d)
WelcomeEye Cam: (additional camera)
ref.: 531007
- C-MOS colour sensor 900TVL
- Viewing angle: 95°H, 75°V