Philips WelcomeEye Link 531034 - Page 25

WelcomeEye / Link / V1
F23
used to:
- congure motion detection activation. When a visitor approaches within about one
metre of the intercom panel, an alert notication is sent to your phone. (this feature is not
recommended in busy walkways).
Each detection wakes up the intercom panel, and the button lights up in blue. (not
adjustable)
Note: If you want to receive motion detection notications, remember to congure this
setting.
To do so:
Follow the detailed information in chapter N on page 8.
Warning: The motion detection mode signicantly reduces the battery life.
Note: there is a delay of about a minute between detections.
- to access the rmware version of your intercom panel.
It is important to check it regularly.