Web-based management (WBM)
8482_en_03 PHOENIX CONTACT 133
9.4.3 "Administration" area
In this area, you can assign a password for restoring the factory default settings on the con-
troller and view information on running updates (e. g. firmware update, WBM update, etc.).
9.4.3.1 "Password" page
On the "Password" page, you can assign a password for restoring the factory default set-
tings on the controller (refer also toSection 9.4.3.2, “"Factory Defaults" page”).
Figure 9-9 "Password" page
Please note:
The password is sent to the network in an unencrypted format.
To Next Page
Loading...
Need help?
General
