Phoenix Contact AXC 1050 User Manual

AXC 1050 (XC)
78
PHOENIX CONTACT 8482_en_03
6.9 Creating the program and variables
• Create the program.
• Create all necessary variables
6.10 Compiling after creating the program
• Select the "Make" entry from the "Build" menu.
6.11 Assigning process data
• Assign the previously created variables to the process data.
6.12 Compiling and sending a project and performing a
cold restart
Compiling a project • Select the "Make" entry from the "Build" menu.
Sending a project • Send the project to the controller.
Performing a cold restart • Perform a cold restart for the controller to start the project on the controller.
For additional information on creating a program and creating variables, refer to the
PC Worx (Express) software online help or quick start guide.
For additional information on process data assignment, refer to the PC Worx (Express)
software online help or quick start guide.
For additional information on sending a project to the controller, refer to the
PC Worx (Express) software online help or quick start guide.
For additional information on performing a cold restart, refer to the PC Worx (Express)
software online help or quick start guide.

Phoenix Contact AXC 1050 Specifications

General

Brand	Phoenix Contact
Model	AXC 1050
Category	Controller
Language	English