Need help?Do you have a question about the Phoenix Contact THERMOMARK CARD Series and is the answer not in the manual?
General| Print Technology | Thermal transfer |
|---|---|
| Resolution | 300 dpi |
| Max Print Width | 105.6 mm |
| Connectivity | USB, Ethernet |
| Display | LCD |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Card Materials | PVC, ABS, PET |
| Supported Materials | Cards, labels |
| Operating Temperature | 5 °C ... 35 °C |
| Storage Temperature | -20 to 60 °C |
Describes the industrial thermal transfer printer for printing cards.
Explains designation of important information and instructions in the manual.
Details the intended purpose and usage guidelines for the device.
Provides critical safety precautions for operating the printer and handling electrical hazards.
Offers guidance on environmentally responsible disposal and recycling of the device.
Illustrates and labels the main components of the THERMOMARK CARD printer.
Guides users through unpacking, checking delivery, and initial setup of the printer.
Step-by-step instructions for connecting the printer to a grounded power socket.
Explains the process of connecting the printer to a computer using a USB cable and installing drivers.
Outlines the procedure for connecting the printer to a network using an Ethernet cable.
Instructions on how to power on the printer and what to expect during system test.
Describes the layout and function of the printer's touchscreen interface.
Explains how to navigate and interact with the touchscreen display.
Defines the meaning of various symbols shown on the printer's start display.
Details different operational states of the printer and their corresponding displays.
Guides on configuring the printer's network settings via the Ethernet interface.
Instructions for executing a test print to verify printer functionality.
Step-by-step guide on how to correctly load the transfer ribbon into the printer.
Instructions for inserting the card magazine into the printer's transport slide.
Specific instructions for inserting UCT material into the magazine for printing.
General guidelines and safety precautions for cleaning the printer.
Detailed steps and safety advice for cleaning the printer's printhead.
Procedures for unlocking the transport lock mechanism.
Steps to secure the printer for transportation, including locking the transport lock.
Table of common printing problems, their causes, and remedies.
Lists error messages, their causes, and recommended solutions or actions.
Official declaration of the product's compliance with relevant EU directives.
Information regarding compliance with FCC regulations for digital devices.
Details about third-party software licenses, including GPL and LGPL, used in the product.
To Next Page
