2 FELOCK_Rev D
To Delete a User or Supervisor:
1) Enter a valid supervisor code and press “enter” button, OR hold the supervisor prox card
up to the prox module until the cart has unlocked.
2) Press and HOLD “clear” button until beeping stops.
3) Enter the code to be deleted and press “enter” button, OR hold the prox card that you
wish to delete from the lock up to the prox module.
4) Press the “clear” button to return to normal operation
To Adjust Cart Locking Times:
1) Input a valid supervisor code (1,2,3,4,5) , and press “enter.”
2) Enter time in seconds (Example: 10 minutes = 600 seconds, 5 minutes = 300 seconds, etc…)
3) Press 5 and “enter” keys simultaneously.
Notes:
• Your electronic lock requires 6 (six) D-Cell Batteries to operate. These can be found
underneath the bottom drawer of the cart when they need to be replaced.
• If you need the reset codes for your electronic lock, you can find the label with these
specific numbers on a label in your top drawer mounted to the side of the drawer, or on the
battery pack below the bottom drawer.
Thank you for your purchase!
If you need further assistance, please call our Customer Support Department at
855-633-2278
Part Number: FELOCK
To Previous Page
Loading...
Need help?
General
