Advanced Phoenix Digital Lock R3
6. To deactivate dual control
Step 1 Press the “M” memory button recessed into the back of the door.
Step 2 Press ‘9’ button
Step 3 Press ‘#’ button a short 3 second tone will sound to confirm
deactivation and SinGLE will appear in the display. The second code
will be automatically erased.
7. To hide code in the display and turnoff keypad sound.
Activate - Press the “M” memory button recessed into the back of
the door (HIdE appears in the display)
Deactivate - Press the “M” memory button recessed into the back of
the door
8. To hide code entry in a number sequence.
The code can be disguised by inserting random numbers either before,
after or both before and after, the personal code. This procedure is
designed to increase security and to confuse a potential observer
attempting to memorise the code. This feature can be also be used with
hidden code display and silent keypad as at 7 above.
For Example
Personal code is set as 4 2 4 2 Random prefix numbers 61 Random suffix
numbers 91507
Step 1 Press C button
Step 2 Enter Code as 61 4 2 4 2 91507
Step 3 Press ‘#’ button
The display will confirm OPEnd
9. Alarm setting
Activate - Press the “M” memory button recessed into the back of
the door (ALErT appears in the display)
Deactivate
Step 1 Press ‘C button
Step 2 Enter Personal Code
Step 3 Press ‘#’ button a short 3 second tone will sound to confirm
deactivation and OPEnd will appear in the display
10. Battery Life: 1 year 3 times a day. Battery replacement
is required when:
1) LObAtt appears in display accompanied by a short one second warning
tone.
2) Correct code is entered but lock will not open.
3) Even if batteries are completely exhausted, the codes are not lost.
#7
Batteries
4 x 1.5 V AAA Alkaline Batteries are required to activate the lock.
Used batteries should not be disposed of with normal domestic
waste. These should be disposed of at approved collection points.
You may also return used batteries to your Retailer at their expense (where
applicable).
#8
#7