8
The button functions as an on/o switch.
Together with your hearing care
professional, you can decide if it also allows
for volume control and/or a program
change.. This is indicated in your individual
instructions.
Phone calls: If paired with a Bluetooth® enabled phone, a
short press will accept
and a long press will reject an incoming call.
On/O: Firmly press the lower part of the button for
3 seconds until the indicator light blinks.
On: indicator light is solid green
O: indicator light is solid red
Enter ight mode: When device is o, press the lower part
of the button for 7 seconds until the solid orange light
appears. Then release the button.
Tap Control (only available for models L90 and L70)
If paired with a Bluetooth® enabled device, multiple
functions can be accessed using Tap Control, please refer to
chapter 10. This is also indicated in your individual
instructions.
To use Tap Control tap the top of your ear twice.
Multi-function button with indicator light
To Next Page
Loading...
Need help?
General
