48 49
3.
Rotate the changing tool
clock-wise runtil some
resistance is felt.
Pull the changing tool out of
the speaker with the used wax
lter attached to the end.
4.
Insert the used wax lter into
the dispensing slot in the
middle of the wax lter
dispenser.
18.2.3 Inserting a new wax lter
5.
Slide the changing tool to
either side of the dispensing
slot. Lift the changing tool up,
leaving the used wax lter in
dispensing slot.
1.
After removing the used wax
lter from the speaker of the
hearing aid, brush away any
remaining debris.
Rotate the ridged disk of the
wax lter dispenser until a
new wax lter is visible in the
window of the disk.
To Next Page
Loading...
Need help?
General
