Pairing your
Nathos Nova Hearing Aid
to a Bluetooth
®
enabled device
On your device (e.g. a phone),
ensure that Bluetooth wireless
technology is enabled and
search for Bluetooth enabled
devices in the connectivity
setting menu.
Switch both hearing aids off,
and on again. You now have
have 3 minutes to pair your
hearing aids with your device.
1
2
3
Your device shows a list of Bluetooth enabled devices.
At this stage you will only see one hearing aid,
continue and select the hearing aid from the list. This
will simultaneously pair both hearing aids to your
phone. A beep confirms successful pairing.
After your hearing aids have been paired to your device,
they will automatically connect again when switched on.
Your hearing aids
connect directly
with Bluetooth
®
enabled phones.
When paired and
connected to your
phone, you will hear
the caller’s voice directly in your hearing aids.
Your hearing aids pick up your voice through its own
microphones. You can accept, end and reject calls directly
on your phone or via your hearing aids (see below)
Initial Pairing
Phone calls
Caller’s voice
Your
voice
Nathos Nova PR
Nathos Nova M
To Next Page
Need help?
General
