27
Fig. 5c
Fig. 5eFig. 5d
Step 5.2 Inserting an UltraPower, SuperPower or M13
model with classic earmold
Before inserting the earmold, check that the earmold
tube is slid over the hearing aid hook correctly. With your
right hand, take your earmold for the right ear (red mark
on the hearing aid, see step 5.1) between your thumb and
forefinger.
Take the earmold up to your ear. Place the canal part of
the earmold into your ear canal (see the part circled in
green (Fig. 5c)). Next place the hearing aid behind your
ear (Fig. 5d). Then insert the upper part of the earmold
into the upper part of the bowl of your ear (Fig. 5e).
To Next Page
Loading...
