29
Fig. 5g Fig. 5h
Step 5.3 Inserting an UltraPower, SuperPower or M13
model with Power SlimTube with classic earmold
Follow the instructions in Step 5.2, as this procedure is
identical.
Step 5.4 Inserting a RIC model with a cShell
With your right hand, place the right hearing aid (red
mark on the hearing aid, see step 5.1) behind your right
ear (Fig. 5g). Place the hearing tube between your thumb
and forefinger. Insert the cShell deep enough into the ear
canal so that the hearing tube lies flat on your ear
(Fig.5h).
To Next Page
Loading...
Need help?
General
