Need help?Do you have a question about the Phonic Road Gear 260 and is the answer not in the manual?
General| Brand | Phonic |
|---|---|
| Model | Road Gear 260 |
| Category | Stereo System |
| Language | English |
Highlights the system's durable casing, wheels, equalizer, speaker outputs, and storage compartments.
Details 160W output, speaker specs, 4-channel mixer, 2-band EQ, and 4-program multi-effect processor.
Details 260W output, speaker specs, 6-channel mixer, 2-band EQ, and 16-program multi-effect processor.
Lists the items included with the RoadGear 160 system, such as speakers, mixer, and microphones.
Lists the items included with the RoadGear 260 system, including two microphones and speakers.
Provides crucial warnings regarding power cable use, grounding, voltage selection, and ventilation.
Step-by-step instructions for conveniently opening and closing the RoadGear kit for setup.
Guides on connecting speakers, instruments, and power for the first time use of the system.
Details microphone, line, and stereo input jacks for connecting audio sources to the mixer.
Explains tape out, effects out, foot switch, and aux return connections for output and control.
Covers peak LED, high and low frequency adjustment knobs for signal management.
Details controls for effects send, stereo balance, and overall channel/mix level adjustments.
Details the digital effect processor's controls including on/off, master level, program selection, and display.
Covers 3-band EQ, master volume, limiter status, and output mode selection for overall system tuning.
Describes the phantom power switch for microphones and the main power switch for the device.
Details the AC power inlet and the voltage selector switch for global use.
Describes the speakers, included microphones, and optional accessories for system expansion.
Instructions for operating and changing the default code of the combination docking locks.
Guidance on setting speaker docking locks correctly to prevent surface scratching.
Advises on speaker load impedance and ensuring limiter LEDs do not illuminate during operation.
Details the procedure and warnings for connecting external DC power supplies or battery packs.
Provides a warning against lifting speakers by the coded latch to avoid damaging the mechanism.
To Next Page
