Need help?Do you have a question about the PHOTON PTN-BAT-05K-WM-LFP and is the answer not in the manual?
Details electrical performance metrics including voltage, capacity, energy, charge/discharge currents and power.
Specifies the communication capabilities, including display types and supported communication protocols like CAN, RS485, RS232, Wi-Fi.
Covers physical dimensions, weight, installation methods, operating conditions, IP rating, cell technology, and scalability.
Lists relevant certifications and the product ordering parts for the battery system.
Provides a summary of the PTN-BAT-05K-WM-LFP as a residential energy storage solution with BMS functionalities.
Details the battery's interface, including switch operation, LED indicators, and communication ports (CAN/RS485, RS232).
Guides on checking outer packing materials and verifying all deliverables are intact and complete before installation.
Lists the necessary tools for both the installation process and protection measures.
Outlines requirements for the installation environment and mounting carrier for safe and proper setup.
Step-by-step instructions for mounting the battery, including dimensions and connection procedures.
Specifies recharge requirements for batteries during normal storage based on temperature, humidity, and SOC.
Provides guidance on recharging batteries that have been over-discharged to prevent damage.
General| Battery Type | LiFePO4 |
|---|---|
| Nominal Voltage | 51.2V |
| Nominal Capacity | 100Ah |
| Energy | 5.12kWh |
| Mounting | Wall Mount |
| Max Continuous Discharge Current | 100A |
| Peak Discharge Current | 150A (3s) |
| Terminal Type | M8 |
| Case Material | Steel |
| IP Rating | IP20 |
| Communication | RS485, CAN |
| Charge Current | 50A |
| Operating Temperature | -20°C to 60°C |
| Storage Temperature | 0°C to 45°C |
| Protection | Overcharge, Over-discharge, Overcurrent, Short Circuit |
| Cycle Life | 6000 cycles @ 80% DOD |
To Next Page