Need help?Do you have a question about the Phylink PLC-128 Series and is the answer not in the manual?
General| Brand | Phylink |
|---|---|
| Model | PLC-128 Series |
| Category | Security Camera |
| Language | English |
Lists all items included in the camera package for verification.
Details the minimum hardware and software needed for camera operation.
Introduces the camera's purpose, design, and discreet surveillance capabilities.
Discusses various mounting accessories and flexibility for installation.
Highlights the camera's HDTV 720P video quality and Megapixel lens.
Covers connectivity aspects like I/O, audio, motion detection, and mobile apps.
Details compliance with FCC regulations and limits for digital devices.
Details compliance with CE directives and standards for the product.
Identifies and labels the various parts of the camera's main unit.
Identifies and labels the sensor unit and associated mounting accessories.
Details the function and purpose of each main unit component.
Details the sensor unit, cable, and mounting accessories.
Explains the purpose and function of the General I/O port.
Guides on how to install the sensor unit in different ways.
Describes mounting the sensor unit on a flat surface.
Describes mounting the sensor unit using an angled bracket.
Explains how to install the sensor unit covertly into walls or ceilings.
Details connecting the sensor unit to the main unit via RJ11 cable.
Provides step-by-step instructions to shorten the sensor unit cable.
Describes connecting the camera to your network using an Ethernet cable.
Guides on mounting the external antenna and inserting the Micro SD card.
Details connecting the AC adapter or using a PoE switch for power.
Explains how to reset the camera to default settings using the reset button.
Guides on setting up wireless connection using WPS button on camera and router.
Provides guidelines for optimal wireless performance and signal strength.
Explains the purpose and pin definitions of the General I/O terminal.
Details the DO terminal and its connection settings for alarm output.
Explains DI terminal for input and GND connection.
Shows wiring example for connecting a PIR detector to the I/O terminal.
Illustrates connecting an alarm siren to the I/O terminal.
Demonstrates wiring a device with a relay to the I/O terminal.
Guides on installing the 'Phycam' app and adding cameras to iOS devices.
Explains auto-discovery of cameras on the local network via the app.
Describes adding cameras by scanning the UID barcode with the smart phone.
Describes adding cameras by manually entering the UID from the sticker.
Explains how to view live camera feed and its controls on the iOS app.
Guides on setting up wireless connection via the smart phone app.
Details selecting and connecting to Wi-Fi networks within the app.
Guides on wireless setup using the WPS function on camera and router.
Explains how to adjust video quality parameters like resolution and bitrate.
Configures actions like recording upon alarm detection and post-recording time.
Sets up SMTP server details and email notifications for alarms.
Specifies recipient addresses and message content for email alerts.
Guides on installing the 'Phycam' app and adding cameras to Android devices.
Explains auto-discovery of cameras on the local network via the app.
Describes adding cameras by scanning the UID barcode with the smart phone.
Describes adding cameras by manually entering the UID from the sticker.
Explains viewing live feed and controls on the Android app.
Guides on setting up wireless connection via the smart phone app.
Guides on wireless setup using the WPS function on camera and router.
Explains how to adjust video quality parameters like resolution and bitrate.
Configures actions like recording upon alarm detection and post-recording time.
Sets up SMTP server details and email notifications for alarms.
Specifies recipient addresses and message content for email alerts.
Guides on installing the 'Camera Live' software from the CD-ROM.
Describes adding cameras within the same network using 'Discovery'.
Explains adding cameras not on the local network by manually entering UID.
Details operations for managing added cameras like playback and deletion.
Explains the live view window and playback control panel functions.
Guides on displaying multiple camera feeds simultaneously on one screen.
Explains how to record, store, and view video footage from the camera.
Guides on taking snapshots and viewing them in the album.
Instructions for setting up and viewing the camera via a web browser.
Describes viewing live video and accessing camera settings via web browser.
Guides on configuring wireless connection via the web interface.
Explains the wireless setup options and interface elements.
Details WPA and WPA2 key setup for secure wireless connection.
Describes accessing the main settings interface for advanced configuration.
Manages user accounts and permissions for camera access.
Details camera settings like privacy mode, LED control, and microphone volume.
Guides on configuring primary, secondary, and mobile video streams.
Provides details on secondary and mobile stream configurations and URLs.
Explains how to play RTSP streams using media players like VLC or QuickTime.
Configures on-screen display of system name, date, and user-defined text.
Configures infrared LED control and night vision modes for low-light conditions.
Details the wireless setup process based on IEEE802.11b/g/n standards.
Explains WPA/WPA2 security mode and encryption type for wireless connection.
Guides on configuring IP address, subnet mask, DNS, and ports.
Explains how to set up Dynamic DNS for remote access to the camera.
Details creating a DDNS account and updating camera's IP address.
Verifies the DDNS connection status and external IP address.
Guides on configuring Universal Plug and Play for network discovery.
Verifies the UPnP connection status and gateway information.
Configures storage destination for NAS or SD card and capacity limits.
Guides on browsing stored files and formatting the SD card.
Details how to set up recording to a NAS drive, including path and authorization.
Sets up tasks for recording based on schedule or events like alarms.
Configures recording to storage triggered by motion detection.
Explains how to configure motion detection zones and sensitivity.
Details window configuration, threshold, and sensitivity adjustments.
Configures schedules for tasks like sending images via email or FTP.
Provides an overview of available tasks for scheduling and management.
Configures sending email alerts with snapshots upon alarm detection.
Notes the requirement for Gmail POP enablement for email sending.
Configures sending emails at regular time intervals.
Guides on uploading pictures to an FTP server upon alarm detection.
Details parameters for FTP alarm sending like server name and authentication.
Configures uploading pictures to FTP at regular time intervals.
Guides on sending alarms or data via HTTP to a specified URL.
Configures sending data via HTTP at regular time intervals.
Configures taking snapshots upon alarm detection and saving them.
Configures taking snapshots at regular time intervals and saving them.
Configures recording to storage triggered by motion detection.
Guides on setting up continuous video recording to storage.
Configures transferring stored files to an FTP server.
Sets system name, contact, and location for camera identification.
Manages user accounts and permissions for camera access.
Configures camera's date, time, time zone, and auto time setting.
Manages camera configuration backups, resets, and restores.
Details the steps for upgrading the camera's firmware via upload.
Guides users through initial camera setup using an intuitive wizard.
Displays and explains system activity and recorded data for troubleshooting.
Addresses problems with the camera's status indicator LED not lighting up.
Solves problems with the viewing interface not appearing in Internet Explorer.
Diagnoses and resolves unstable or unreliable network connections.
Addresses issues where wireless communication is not working.
Guides on recovering lost IP address or password for accessing the interface.
Explains causes and solutions for video strips and noisy images.
Provides detailed technical data on camera features, video, audio, and I/O.
Details wireless standards, security, frequency, and network protocols.
Lists PC/Mac system requirements and included accessories.
Defines key terms and acronyms used throughout the manual.
Provides contact details for support and links to website resources.
To Next Page
