Pressure Exceeding 300 mmHg: Switch the unit off and measure again calmly. If error keeps
occurring, return the device to the local distributor or service centre.
Data Error: Remove the batteries, wait for 60 seconds, and reload. If error keeps occurring,
return the device to the local distributor or service centre.
Exceeding Measurement Range: Measure again calmly. If error keeps occurring, return the
device to the local distributor or service centre.
Calibration Indicator: Appears when the monitor requires re-calibration. Re-calibration recom-
mended.
Hypertension level indicator
The ESH(European Society of Hypertension) has developed the blood pressure measurement guidelines.
This device has an innovative pressure classification indicator to give a visual display of the presumed risk
level when systolic pressure is ≥ 135 mmHg and/or diastolic pressure is ≥ 85 mmHg.
Note:
We strongly recommend that you visit your doctor if the irregular heartbeat icon appears frequently. The
cardiac hypertension level classification indicator is not to be used for diagnostic purposes, it merely pro-
vides general information.
To Next Page
