Need help?Do you have a question about the Picotest M3510A and is the answer not in the manual?
General| Brand | Picotest |
|---|---|
| Model | M3510A |
| Category | Multimeter |
| Language | English |
Provides an overview of the multimeter's key features and capabilities.
Lists important safety precautions and guidelines to follow before operating the device.
Outlines critical safety guidelines to prevent electric shock, injury, or damage to the equipment.
Guides users through the initial setup process for the M3510A DMM.
Provides instructions on connecting the multimeter to a power source and checking voltage settings.
Details the procedure for changing the multimeter's voltage setting to match the local power supply.
Guides users on how to safely replace the multimeter's fuse.
Introduces the basic operations and main parts of the M3510A/11A DMM.
Describes the buttons and terminals located on the front panel of the multimeter.
Describes the rear panel of the multimeter and its connectors and features.
Explains how to perform DC and AC voltage measurements using the multimeter.
Details the procedure for measuring DC and AC current with the multimeter.
Explains how to measure resistance using both 2-wire and 4-wire methods.
Guides users on measuring frequency and period using the multimeter's on-board counter.
Explains how to perform temperature measurements using thermocouples and RTDs.
Guides users on measuring temperature using thermocouple sensors.
Explains how to perform temperature measurements using RTD sensors.
Guides users on how to configure measurement parameters like ADC, filter, resolution, and range.
Guides on selecting the correct sensor type (RTD, Thermocouple) for temperature measurements.
Details the triggering system and available trigger operations.
Describes the different trigger modes (auto, immediate, single) for measurements.
Lists SCPI commands for controlling the multimeter remotely.
Presents detailed performance specifications and accuracy data for various measurement functions.
Provides detailed information on remote interface commands and protocols.
Lists SCPI commands for performing math operations like Percent, Average, Null, etc.
Lists SCPI commands for controlling trigger modes, sources, and settings.
To Next Page
