The Pictar ProGrip / Pro Charge Grip is a mobile photography accessory designed to enhance the smartphone photography experience, bringing it to a "next level" according to the manufacturer. It aims to provide users with a more ergonomic and feature-rich way to capture photos with their smartphones.

Function Description:

The Pictar ProGrip acts as an external grip for smartphones, mimicking the feel and controls of a traditional camera. It connects to the smartphone and, in conjunction with the dedicated Pictar app, offers advanced photographic controls that are typically not available through standard smartphone camera interfaces. The "Pro Charge Grip" variant includes an additional feature: wireless charging for the smartphone while it's docked in the grip.

The core functionality revolves around providing physical controls for various camera settings, which allows for quicker adjustments and a more tactile shooting experience. These controls likely include a shutter button, zoom control, and potentially other customizable dials or buttons for exposure compensation, ISO, white balance, and more, although the manual doesn't explicitly detail all controls. The grip is designed to improve stability and comfort when holding the smartphone for extended periods of shooting.

The device also supports the installation of a viewfinder, which can be calibrated to ensure accurate framing and composition, especially useful in bright conditions where the phone screen might be difficult to see.

Usage Features:

App Integration: The Pictar ProGrip requires the installation of the dedicated Pictar app, available on both iOS (App Store) and Android (Google Play). This app serves as the interface for controlling the smartphone camera via the grip's physical buttons.
Easy Installation and Removal:
- Installation: The smartphone is inserted into the grip by first pulling up the top clamp, then sliding the phone in, and finally pushing the clamp down until it "clicks" into place, securing the phone.
- Removal: To remove the phone, the top clamp is pulled up, and the phone is then slid out.
Wrist Strap: The grip includes a provision for installing a wrist strap, enhancing security and preventing accidental drops. The strap is threaded through a loop on the grip.
Power On: After the phone is installed, the Pictar app needs to be turned on to establish communication between the grip and the smartphone.
Wireless Charging (Pro Charge Grip only):
- To initiate wireless charging, the phone must be connected to the grip.
- Charging is started by pressing both designated buttons on the grip. A charging icon will appear on the phone screen.
- Charging is stopped by pressing the same two buttons again, and the charging icon will disappear.
Viewfinder Installation and Calibration:
- Installation: A viewfinder accessory can be attached to the grip, likely sliding into a designated slot.
- Calibration: After installation, the viewfinder needs to be calibrated. This involves adjusting its position (e.g., sliding it left or right) until the image seen through the viewfinder aligns correctly with the image on the phone's screen. A visual confirmation (e.g., a checkmark) indicates successful calibration.
Battery Charging: The Pictar ProGrip itself has an internal battery that needs to be charged.
- Charging is done via a USB cable, which is plugged into a port on the grip.
- An indicator light on the grip shows the charging status: a blinking light indicates charging, and a solid light indicates a full charge.

Important Technical Specifications (Inferred from manual):

Compatibility: Compatible with both iPhone (iOS) and Android smartphones, requiring the respective Pictar app.
Connectivity: Operates wirelessly with the smartphone, likely via Bluetooth, to transmit commands from the physical buttons to the app.
Power Source: The grip is powered by an internal rechargeable battery, charged via USB.
Wireless Charging Output (Pro Charge Grip): Provides wireless charging capabilities for compatible smartphones. The specific charging wattage is not mentioned but is designed to charge the phone while in use.
Build Quality: The device appears to be constructed from durable materials, designed to securely hold a smartphone and withstand regular use.
Warranty: Comes with a 2-year warranty.
Origin: Developed and produced by Mymiggo Group LTD., designed in the UK, and made in China. Patent pending.

Maintenance Features:

Battery Charging: Regular charging of the Pictar ProGrip's internal battery is necessary for its operation. The manual illustrates the process of connecting a USB cable to charge the device.
Software Updates: As an app-dependent device, it is likely that the Pictar app will receive updates to improve functionality, fix bugs, and ensure compatibility with new smartphone models and operating systems. Users should keep the app updated.
Cleaning: While not explicitly detailed, general electronic device cleaning practices would apply, such as wiping the grip with a soft, dry cloth to remove dust and grime. Avoid harsh chemicals or excessive moisture.
Storage: When not in use, storing the grip in a safe place, away from extreme temperatures or direct sunlight, would help prolong its lifespan.

The Pictar ProGrip / Pro Charge Grip aims to bridge the gap between casual smartphone photography and more serious, controlled shooting, offering a robust set of features for mobile photographers.

PICTAR PRO GRIP - Page 2