Pilz PNOZ m B0.1 - Technical Details; Safety Characteristic Data

Technical details
Operating Manual PNOZ m B0.1
1005720-EN-04
| 37
10 Technical details
General
Certifications CE, EAC, KOSHA, TÜV, UKCA, cULus Listed
Application range Failsafe
Module's device code 0x5F
Electrical data
Supply voltage
for Supply to the system
Voltage 24 V
Kind DC
Voltage tolerance -20 %/+25 %
Max. continuous current that the external power
supply must provide 1,6 A
Inrush current that the external power supply must
provide 3 A
External unit fuse protection F1 6 A, circuit breaker 24 VDC, characteristic B / 6 A,
60 VDC, SCCR: 10 kA, [UL 498/CSA C22.2 No. 5,
DIVQ/7]
Supply voltage
for Supply to the SC outputs
Voltage 24 V
Kind DC
Voltage tolerance -20 %/+25 %
Max. continuous current that the external power
supply must provide 8 A
External unit fuse protection F2 10 A, circuit breaker 24 VDC, characteristic B/C /
10 A, 60 VDC, SCCR: 10 kA, [UL 498/CSA C22.2
No. 5, DIVQ/7]
Potential isolation Yes
Supply voltage
Current consumption 32 mA
Power consumption 0,8 W
Max. power dissipation of module 7,4 W
Status indicator Display, LED
Permitted loads inductive, capacitive, resistive
Configurable inputs/outputs (inputs or auxiliary
outputs)
Quantity 8
Potential isolation No
Configurable inputs
Input voltage in accordance with EN 61131-2 Type
1 24 V
Input current at rated voltage 5 mA
Input current range 2,5 - 5,3 mA
Pulse suppression 0,5 ms
Maximum input delay 2 ms